Because all of our front mount hitches are custom fit to a specific year, make and model of vehicle, the mounting hole distance is not a spec that's listed or typically needed on them.
If you're not using the hitch for a specific vehicle but rather for special fabrication project, you may be able to use one of our universal RV hitches like # 5350 which is adjustable to fit frames 24 to 46 inches wide. The Multi-Fit Motorhome Trailer Hitch has the highest capacity (500lb TW and 5,000lb... view full answer...
Air Lift offers the # AL88205 will fit your 2013 210 Roadtrek that uses a Chevy 3500 Cutaway Van Chassis, if your Roadtrek has a fully boxed frame and a GVWR greater than 7300 lbs. view full answer...
We do have the RV Propane Gas and Carbon Monoxide Detector # RS54FR you are looking for. This is the RV Safe part number RVCOLP-2B. view full answer...
The K-Source Custom Towing Mirrors # KS62169-70G only come with the manual operation and no electrical connections, but if you'd like to retain the heat feature on your OEM mirrors and get the extended towing mirrors as well then I recommend picking up the Longview Custom Towing Mirrors # LVT-1700 which just slip on over OEM mirrors and allow you to use the same features you're currently used to on your 2006 Chevy Express. view full answer...
The Prodigy P3 Brake Controller part # 90195 that you referenced will control the braking power of a trailer's brakes that you are towing.
Express Vans with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
Check out the install video I linked. It shows a similar Tekonsha brake controller being installed in a 2014 Chevy Express van like yours.
Some models will have the other wiring... view full answer...
For the 245/75-16 tires on your 2012 Chevrolet Express van we offer a whole range of tire chains including both the low-profile S-Class type required for passenger vehicles with limited wheel clearance and also heavier-duty chains for on-road and off-road use. All chains for your tire size can be view by clicking on the linked page.
For example, for on-road use S-Class chains that include features like automatic tensioning and quick-release, such as Thule's K-Summit XXL # TH02230K77, are... view full answer...
Yes, we do have SuperSprings SumoSprings for your 2008 Chevy Express 3500 cargo van. If it is a 2-wheel drive model you can use # SSR-205-47. There are no SumoSpring options for 4x4 models.
If you do have a 4x4 then you can use Timbren springs # TGMRG30PL as long as the factory bump stop bracket is curved. If the factory bump stop bracket is flat then you would use # TGMRG30LB. view full answer...
Blue Ox does offer the Universal Bolt-On Adapter Tabs, # BX88266, which could be mounted to the metal bumper of your 2006 Chevrolet Express Van but it will most likely need to be reinforced or modified. Please keep in mind that these brackets must be mounted to a flat surface.
The universal brackets are designed for use with Blue Ox tow bars like the Alpha, # BX7365.
I have included an article for you which covers the basics of flat towing. To complete your set-up, you may still need... view full answer...
Yes, you can swap out your spring bars to the lighter duty part # EQ90-01-0699. These bars have a tongue weight range of up to 600 lbs.
We do not have any front hitches at this time for a 2014 Express though. view full answer...
As I do not see an aftermarket front mount trailer hitch receiver available for your 2006 Chevrolet Express Van you are most likely going to have to have one custom fabricated. We do have our Weld-On 2" Receiver # E17 which can help with the fabrication process if you are planning on doing this yourself. If this is outside your skill level you can reach out to a local fabrication shop to get an estimate. view full answer...
We have several types of universal towing mirrors that should work nicely on your 2005 Chevrolet Express Van, see link.
I would recommend the CIPA Deluxe Door Mount Mirror, item # 11650. This mirror attaches to the door and is very sturdy. I have had the opportunity to test several of the universal towing mirrors that we carry and these offer the most stable view at highway speeds.
The Clip-On mirror that you referenced, # 7070, works well at low speed and when parking, but has a significant... view full answer...
Currently we only have the Mounting Brackets # RM-RBK15 which are custom fit for your 1998 Chevrolet Express 3500 Class C motorhome. This will require the Roadmaster Reflex stabilizer RSSC which we currently do not carry. view full answer...
If you are looking for a wiring kit like the Hopkins # 31345 but that uses universal wiring as opposed to the connectors that tee in behind the tail lights on a 2008 Chevy Express Van then you will still need to use the Hopkins wiring kit as there are not any without the quick and speedy connection. However, you can just snip those connectors off and splice your connections
This kit calls for splicing to your tail light wires whether it is with butt connectors or the included quick splices,... view full answer...
We do not have a separate D-ring like the Buyers Products 5/8" Forged D-Ring # 337B40 without the mount. However, the mount is not permanently attached to the ring so you don't have to use it if you don't want to. view full answer...
If you have a sturdy hitch one solution is the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening # RM-195225 and then using a cargo carrier in the hitch opening like the # C18152 which is a non-folding carrier that will fit the 2 inch hitch. This setup will cut your hitch capacity in at least half so please do not try to carry anything too heavy if you go this route. view full answer...
For the 2004 Chevy Express Van, the only available Van Tred options go as far up as the back of the rear seats.A second piece or one long piece that covers the front is not available.
When looking at the Van Tred options, linked for reference, be sure to note whether the part you want is for a standard wheel base or the extended wheel base. The # VTRG96X Van Tred is made for the extended wheel base. I have included a link to a video for the Van Tred as well. view full answer...
Actually the CTEK MULTI US 7002 12-Volt Universal Battery Charger # CTEK56353 has a way to accomplish what you are wanting to do without requiring you to permanently install the charge on the vehicle. It comes with a quick disconnect harness that you attach to the terminals of your battery which you can leave installed all the time so that when you want to charge the battery you just plug the charger in. This is a much better and easier solution than leaving the charger installed all the time. view full answer...
We have just what you need.
To convert your van's 4-pole flat trailer connector to a 7-way format to match your trailer you can use adapter # 37185 from Hopkins. This simply plugs in to the 4-pole on the van and provides BOTH a 4-pole output and a 7-way output socket in one housing. This way you do not have to remove the adapter when you next pull a trailer with 4-pole wiring. A mounting bracket is included.
If you ever need to make the additional connections for trailer brakes, reverse... view full answer...
We don't offer the Curt part, but we do carry the identical Hopkins # 47549. This adapter is set up with the center pin carrying the 12-volt auxiliary power circuit, but it can easily be swapped so the center pin carries the brake output if necessary, if that's the way your connector on your trailer is wired. I'v linked to a product description video featuring the # 47549 adapter. view full answer...
Go To Results